Apply all of the previously scheduled events to the passed in Param or AudioParam. The applied values will start at the context's current time and schedule all of the events which are scheduled on this Param onto the passed in param.

This is similar to cancelScheduledValues except it holds the automated value at time until the next automated event.

const signal = new Tone.Signal(0).toDestination();
signal.linearRampTo(1, 0.5, 0);
signal.cancelAndHoldAtTime(0.3);

Cancels all scheduled parameter changes with times greater than or equal to startTime.

const signal = new Tone.Signal(0).toDestination();
signal.setValueAtTime(0.1, 0.1);
signal.setValueAtTime(0.2, 0.2);
signal.setValueAtTime(0.3, 0.3);
signal.setValueAtTime(0.4, 0.4);
// cancels the last two scheduled changes
signal.cancelScheduledValues(0.3);

disconnect and dispose.

Start exponentially approaching the target value at the given time. Since it is an exponential approach it will continue approaching after the ramp duration. The rampTime is the time that it takes to reach over 99% of the way towards the value. This methods is similar to setTargetAtTime except the third argument is a time instead of a 'timeConstant'

const osc = new Tone.Oscillator().toDestination().start();
// exponential approach over 4 seconds starting in 1 second
osc.frequency.exponentialApproachValueAtTime("C4", "+1", 4);

Schedules an exponential continuous change in parameter value from the current time and current value to the given value over the duration of the rampTime.

const delay = new Tone.FeedbackDelay(0.5, 0.98).toDestination();
// a short burst of noise through the feedback delay
const noise = new Tone.Noise().connect(delay).start().stop("+0.1");
// making the delay time shorter over time will also make the pitch rise
delay.delayTime.exponentialRampTo(0.01, 20);

Schedules an exponential continuous change in parameter value from the previous scheduled parameter value to the given value.

const signal = new Tone.Signal(0).toDestination();
// the ramp is starts from the previously scheduled value
signal.setValueAtTime(0, 0.1);
signal.exponentialRampToValueAtTime(1, 0.4);

Get the object's attributes.

const osc = new Tone.Oscillator();
console.log(osc.get());

Returns all of the default options belonging to the class.

Return the elapsed time of the number of ticks from the given time

Returns the tick value at the time. Takes into account any automation curves scheduled on the signal.

Given a tick, returns the time that tick occurs at.

Get the signals value at the given time. Subsequent scheduling may invalidate the returned value.

const signal = new Tone.Signal().toDestination();
// ramp up to '8' over 3 seconds
signal.rampTo(8, 3);
// ramp back down to '0' over 3 seconds
signal.rampTo(0, 3, "+3");
setInterval(() => {
	// check the value every 100 ms
	console.log(signal.getValueAtTime(Tone.now()));
}, 100);

Return the current time of the Context clock without any lookAhead.

setInterval(() => {
	console.log(Tone.immediate());
}, 100);

Schedules an linear continuous change in parameter value from the current time and current value to the given value over the duration of the rampTime.

const signal = new Tone.Signal(1).toDestination();
signal.linearRampTo(0, 0.3, 0.1);

Schedules a linear continuous change in parameter value from the previous scheduled parameter value to the given value.

const signal = new Tone.Signal(0).toDestination();
// the ramp is starts from the previously scheduled value
signal.setValueAtTime(0, 0.1);
signal.linearRampToValueAtTime(1, 0.4);

Return the current time of the Context clock plus the lookAhead.

setInterval(() => {
	console.log(Tone.now());
}, 100);

Ramps to the given value over the duration of the rampTime. Automatically selects the best ramp type (exponential or linear) depending on the units of the signal

const osc = new Tone.Oscillator().toDestination().start();
// schedule it to ramp either linearly or exponentially depending on the units
osc.frequency.rampTo("A2", 10);

const osc = new Tone.Oscillator().toDestination().start();
// schedule it to ramp starting at a specific time
osc.frequency.rampTo("A2", 10, "+2");

Set multiple properties at once with an object.

const filter = new Tone.Filter();
// set values using an object
filter.set({
	frequency: 300,
	type: "highpass"
});

Replace the Param's internal AudioParam. Will apply scheduled curves onto the parameter and replace the connections.

Creates a schedule point with the current value at the current time. Automation methods like linearRampToValueAtTime and exponentialRampToValueAtTime require a starting automation value usually set by setValueAtTime. This method is useful since it will do a setValueAtTime with whatever the currently computed value at the given time is.

const osc = new Tone.Oscillator().toDestination().start();
// set the frequency to "G4" in exactly 1 second from now.
osc.frequency.setRampPoint("+1");
osc.frequency.linearRampToValueAtTime("C1", "+2");

Start exponentially approaching the target value at the given time with a rate having the given time constant.

Schedules a parameter value change at the given time.

const osc = new Tone.Oscillator(20).toDestination().start();
// set the frequency to 40 at exactly 0.25 seconds
osc.frequency.setValueAtTime(40, 0.25);

Sets an array of arbitrary parameter values starting at the given time for the given duration.

const signal = new Tone.Signal(1).toDestination();
signal.setValueCurveAtTime([1, 0.2, 0.8, 0.1, 0], 0.2, 0.3);

Start exponentially approaching the target value at the given time. Since it is an exponential approach it will continue approaching after the ramp duration. The rampTime is the time that it takes to reach over 99% of the way towards the value.

const signal = new Tone.Signal(1).toDestination();
signal.targetRampTo(0, 0.3, 0.1);

Convert some number of ticks their the duration in seconds accounting for any automation curves starting at the given time.

The inverse of ticksToTime. Convert a duration in seconds to the corresponding number of ticks accounting for any automation curves starting at the given time.

Convert the input to a frequency number

const gain = new Tone.Gain();
console.log(gain.toFrequency("4n"));

Convert the incoming time to seconds

const gain = new Tone.Gain();
console.log(gain.toSeconds("4n"));

Convert the class to a string

const osc = new Tone.Oscillator();
console.log(osc.toString());

Convert the input time into ticks

const gain = new Tone.Gain();
console.log(gain.toTicks("4n"));