The oscillator type without the partialsCount appended to the end

const osc = new Tone.Oscillator();
osc.type = "sine2";
console.log(osc.baseType); // "sine"

The number of seconds of 1 processing block (128 samples)

console.log(Tone.Destination.blockTime);

channelCount is the number of channels used when up-mixing and down-mixing connections to any inputs to the node. The default value is 2 except for specific nodes where its value is specially determined.

channelCountMode determines how channels will be counted when up-mixing and down-mixing connections to any inputs to the node. The default value is "max". This attribute has no effect for nodes with no inputs.

• "max" - computedNumberOfChannels is the maximum of the number of channels of all connections to an input. In this mode channelCount is ignored.
• "clamped-max" - computedNumberOfChannels is determined as for "max" and then clamped to a maximum value of the given channelCount.
• "explicit" - computedNumberOfChannels is the exact value as specified by the channelCount.

channelInterpretation determines how individual channels will be treated when up-mixing and down-mixing connections to any inputs to the node. The default value is "speakers".

The context belonging to the node.

The number of detuned oscillators. Must be an integer greater than 1.

const fatOsc = new Tone.FatOscillator("C#3", "sawtooth").toDestination().start();
// use 4 sawtooth oscillators
fatOsc.count = 4;

Set this debug flag to log all events that happen in this class.

The detune value in cents (100th of a semitone).

const osc = new Tone.PulseOscillator("F3").toDestination().start();
// pitch it 1 octave = 12 semitones = 1200 cents
osc.detune.setValueAtTime(-1200, Tone.now());
osc.detune.setValueAtTime(1200, Tone.now() + 0.5);
osc.detune.linearRampToValueAtTime(0, Tone.now() + 1);
osc.stop(Tone.now() + 1.5);

Indicates if the instance was disposed. 'Disposing' an instance means that all of the Web Audio nodes that were created for the instance are disconnected and freed for garbage collection.

The frequency value of the oscillator

const osc = new Tone.FMOscillator("Bb4").toDestination().start();
osc.frequency.rampTo("D2", 3);

Sources have no inputs

Mute the output.

const osc = new Tone.Oscillator().toDestination().start();
// mute the output
osc.mute = true;

The number of inputs feeding into the AudioNode. For source nodes, this will be 0.

const node = new Tone.Gain();
console.log(node.numberOfInputs);

The number of outputs of the AudioNode.

const node = new Tone.Gain();
console.log(node.numberOfOutputs);

The callback to invoke when the source is stopped.

The output note

'partialCount' offers an alternative way to set the number of used partials. When partialCount is 0, the maximum number of partials are used when representing the waveform using the periodicWave. When 'partials' is set, this value is not settable, but equals the length of the partials array. A square wave wave is composed of only odd harmonics up through the harmonic series. Partial count can limit the number of harmonics which are used to generate the waveform.

const osc = new Tone.Oscillator("C3", "square").toDestination().start();
osc.partialCount = 1;
setInterval(() => {
	osc.partialCount++;
	console.log(osc.partialCount);
}, 500);

The partials describes the relative amplitude of each of the harmonics of the oscillator. The first value in the array is the first harmonic (i.e. the fundamental frequency), the second harmonic is an octave up, the third harmonic is an octave and a fifth, etc. The resulting oscillator output is composed of a sine tone at the relative amplitude at each of the harmonic intervals.

const osc = new Tone.Oscillator("F3").toDestination().start();
setInterval(() => {
	// generate 8 random partials
	osc.partials = new Array(8).map(() => Math.random());
}, 1000);

The phase is the starting position within the oscillator's cycle. For example a phase of 180 would start halfway through the oscillator's cycle.

const osc = new Tone.Oscillator({
	frequency: 20,
	phase: 90
}).toDestination().start();

The duration in seconds of one sample.

console.log(Tone.Transport.sampleTime);

The detune spread between the oscillators. If "count" is set to 3 oscillators and the "spread" is set to 40, the three oscillators would be detuned like this: [-20, 0, 20] for a total detune spread of 40 cents.

const fatOsc = new Tone.FatOscillator().toDestination().start();
fatOsc.spread = 70;

Returns the playback state of the source, either "started" or "stopped".

const player = new Tone.Player("https://tonejs.github.io/examples/audio/FWDL.mp3", () => {
	player.start();
	console.log(player.state);
}).toDestination();

The type of the oscillator

The version number semver

The volume of the output in decibels.

const source = new Tone.PWMOscillator().toDestination();
source.volume.value = -6;