Tone.OmniOscillator↳ EXTENDS Tone.Source
Tone.OmniOscillator aggregates Tone.Oscillator, Tone.PulseOscillator, Tone.PWMOscillator, Tone.FMOscillator, Tone.AMOscillator, and Tone.FatOscillator into one class. The oscillator class can be changed by setting the
omniOsc.type = "pwm" will set it to the Tone.PWMOscillator. Prefixing any of the basic types (“sine”, “square4”, etc.) with “fm”, “am”, or “fat” will use the FMOscillator, AMOscillator or FatOscillator respectively. For example:
omniOsc.type = "fatsawtooth" will create set the oscillator to a FatOscillator of type “sawtooth”.
CONSTRUCTORnew Tone.OmniOscillator (
.width↝ NormalRange #
The width of the oscillator (only if the oscillator is set to “pulse”)
.harmonicity↝ Positive #
Harmonicity is the frequency ratio between the carrier and the modulator oscillators. A harmonicity of 1 gives both oscillators the same frequency. Harmonicity = 2 means a change of an octave. See Tone.AMOscillator or Tone.FMOscillator for more info.
.modulationFrequency↝ Frequency #
The modulationFrequency Signal of the oscillator (only if the oscillator type is set to pwm). See Tone.PWMOscillator for more info.
.modulationType↝ String #
The type of the modulator oscillator. Only if the oscillator is set to “am” or “fm” types. see. Tone.AMOscillator or Tone.FMOscillator for more info.
.partials↝ Array #
The partials of the waveform. A partial represents the amplitude at a harmonic. The first harmonic is the fundamental frequency, the second is the octave and so on following the harmonic series. Setting this value will automatically set the type to “custom”. The value is an empty array when the type is not “custom”. This is not available on “pwm” and “pulse” oscillator types.
.spread↝ Cents #
The detune spread between the oscillators. If “count” is set to 3 oscillators and the “spread” is set to 40, the three oscillators would be detuned like this: [-20, 0, 20] for a total detune spread of 40 cents. See Tone.FatOscillator for more info.
.type↝ String #
The type of the oscillator. Can be any of the basic types: sine, square, triangle, sawtooth. Or prefix the basic types with “fm”, “am”, or “fat” to use the FMOscillator, AMOscillator or FatOscillator types. The oscillator could also be set to “pwm” or “pulse”. All of the parameters of the oscillator’s class are accessible when the oscillator is set to that type, but throws an error when it’s not.
.channelCount↝ Number READONLY #
channelCount is the number of channels used when up-mixing and down-mixing connections to any inputs to the node. The default value is 2 except for specific nodes where its value is specially determined.
.channelCountMode↝ String READONLY #
channelCountMode determines how channels will be counted when up-mixing and down-mixing connections to any inputs to the node. The default value is “max”. This attribute has no effect for nodes with no inputs.
.channelInterpretation↝ String READONLY #
channelInterpretation determines how individual channels will be treated when up-mixing and down-mixing connections to any inputs to the node. The default value is “speakers”.
.context↝ Tone.Context READONLY #
Get the audio context belonging to this instance.
.numberOfInputs↝ Number READONLY #
The number of inputs feeding into the AudioNode. For source nodes, this will be 0.
.numberOfOutputs↝ Number READONLY #
The number of outputs coming out of the AudioNode.
.volume↝ Decibels #
The volume of the output in decibels.
.state↝ Tone.State READONLY #
Returns the playback state of the source, either “started” or “stopped”.
.set ( )#
Set a member/attribute of the oscillator.
.toMaster ( )#
Connect ‘this’ to the master output. Shorthand for this.connect(Tone.Master)
.connect ( )#
optionally which output to connect from
optionally which input to connect to
connect the output of a ToneNode to an AudioParam, AudioNode, or ToneNode
.disconnect ( )#
Either the output index to disconnect if the output is an array, or the node to disconnect from.
disconnect the output
.unsync ( )#
Unsync the source to the Transport. See Tone.Source.sync
.start ( )#
Start the source at the specified time. If no time is given, start the source now.
.stop ( )#
Stop the source at the specified time. If no time is given, stop the source now.